Railway Locomotive Cable

Application:

 

The Thin Wall Single and Dual Layer E-Beam Cross-linked Cables are used for protected/ permanent installation inside and out side railway rolling stock to connect fixed and moving parts viz. control cables for Tap changer of electric locomotives, AC/DC EMU, BG, AC EMU & MEMU coaching Stock.



Product Construction:

 

Construction - Electron beam Cross-linked Thin walled Flexible Elastomeric Single Core & Multi Core Cables 
Conductor - Flexible Annealed Tinned Copper Conductor - Class - 5 as per IS:8130, BS:6360, IEC 60228.
Insulation - E-Beam Cross-linked – EPDM / Polyolefin / EVA - Single or Dual Layer
Braiding - Annealed Tinned Copper Conductor
Outer sheath - E-Beam Cross-linked – EPDM / Polyolefin / EVA
Armouring  - GI Round Wire or Flat Strip / Double Steel Tape Armoured Cables.



Reference Standards:

 

ELRS/SPEC/ELC/0019 - Rev 3, CLW / ES / 3 / 0458 and 459



Technical Data:

 

Rated Voltage - 330 V, 750 V, 600/1000 V and 1.8/3.0 KV
Temperature Range - (-) 40°C to (+) 120°C /  (+) 150°C
Short Circuit Temperature - (+) 280°C
Bending Radius - 3 x Diameter for cable dia <10mm,
5 x Diameter for cable dia >10mm
Insulation Resistance Constant 
(at room temp)
- ≥ 12000 MΩ-Km



Features:

 

Halogen Free / Limited Fire Hazard 
Low Smoke Emission
Low Toxic Fume 
Flame Resistant
Resistant to Mineral Oil, Lubricating Oil, Detergent Oil and Diesel, etc.
Resistance to high & low temperature , Ozone, Weathering and Abrasion


Our Products